Xerox Phaser 3610 User Manual page 55

7. Adjust the width guides until they touch the edges of the paper.
8. Adjust the paper stop until it touches the edges of the paper.
9. Slide the tray back into the printer.
10. If the control panel prompts you, on the screen, verify the paper size and type.
a. At the printer control panel, verify that the displayed paper size matches the paper in the tray.
If correct, press OK.
b. If the displayed paper size does not match the paper in the tray, navigate to the correct paper
size, then press OK.
To navigate through the menu, use the Up or Down arrow buttons.
Note:
c. Verify that the displayed paper type matches the paper in the tray. If correct, press OK.
d. If the displayed paper type does not match the paper in the tray, navigate to the correct paper
type, then press OK.
® ®
Xerox Phaser 3610 Black and White Printer
Paper and Media
55
User Guide