Dvd Audio - Denon DVD-3910 Operating Instructions Manual

w When "DIGITAL OUT" is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS, bitstream signals
are output from the digital audio output terminals. When playing DVDs
recorded in linear PCM or packed PCM, linear PCM signals are output.
Select "NORMAL" when making digital connections to an AV amplifier
with built-in Dolby Digital and DTS decoder.
PCM
When playing Dolby Digital/DTS bitstream signals or DVDs recorded in
linear PCM or packed PCM, the signals are converted into 48 kHz/16-
bit PCM (2-channel) signals and output from the digital outputs. When
playing DVDs recorded in PCM, linear PCM signals are output.
e When "LPCM (44.1 kHz/ 48 kHz)" is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are not copyright-
protected, for 2-channel PCM audio signals up to 96 kHz, linear PCM
signals are output as such without being converted from the digital
outputs. (176.2 kHz and 192 kHz signals are converted to 88.2 kHz and
96 kHz, respectively.)
For DVDs containing multi-channel PCM signals, the digital signals are
down-mixed for output into two channels, front left and right. (Only the
front left and right channels are output for sources for which down-
mixing is prohibited.)
When playing copyright-protected linear PCM or packed PCM DVDs, in
consideration of copyrights, no digital signals are output for sources
exceeding 48 kHz/16 bits. When playing such sources, either set to
"ON" or make analog connections. (See page 14.)
ON
3
Linear PCM and packed PCM signals are converted to 44.1 kHz or 48
kHz and output. (The PCM digital audio output signals are converted to
48 kHz or less in consideration of copyrights.) When making digital
connections to an AV amplifier that is not compatible with 96 kHz/88.2
kHz signals, set to "ON".
r When "SOURCE DIRECT" is selected:
OFF (Factory default)
Please set to OFF when performing speaker settings or setting the
delay time and playing back.
ON
Set to ON when playing back without performing the processing of
speaker settings. Performing this setting will result in the setting of
the DTS recommended all-channel, full bandwidth playback. (Note
that the volume of the sub woofer will increase by 5 dB, and there
will be an increase of 15 dB with a Super Audio CD.) This is also set
when playing back a 6-channel source of DVD audio that has been
recorded with all channels and full bandwidth. When set to "OFF",
the speaker size will be set to "Large" for all speakers and the sub
woofer will be set to "Yes". When playing back software such as
this, perform the analog connections according to the software
instruction manual.
t When "BASS ENHANCER" is selected:
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In the case, set the subwoofer to "YES" at the speaker settings.
✽ This works only with analog audio output.
✽ This does not work at "SOURCE DIRECT" is on.
Remote control unit Remote control unit
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUT
L PCM (4 4 .1 kHz / 4 8 kH z)
SOURCE D I RE CT
BASS ENHANCE R
COMPRESS ION
SACD F I L TER
E X I T SE TUP
SE L EC T : DE C I S I ON : ENTER BUT TON
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUT
L PCM (4 4 .1 kHz / 4 8 kH z)
SOURCE D I RE CT
BASS ENHANCE R
COMPRESS ION
SACD F I L TER
E X I T SE TUP
SE L EC T : DE C I S I ON : ENTER BUT TON
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUT
L PCM (4 4 .1 kHz / 4 8 kH z)
SOURCE D I RE CT
BASS ENHANCE R
COMPRESS ION
SACD F I L TER
E X I T SE TUP
SE L EC T : DE C I S I ON : ENTER BUT TON
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUT
L PCM (4 4 .1 kHz / 4 8 kH z)
SOURCE D I RE CT
BASS ENHANCE R
COMPRESS ION
SACD F I L TER
E X I T SE TUP
SE L EC T : DE C I S I ON : ENTER BUT TON
ENGLISH
NORMAL
PCM
OF F
ON
OF F
ON
OF F
ON
41