Denon DVD-3910 Operating Instructions Manual page 37

w When "TV TYPE" is selected:
NTSC
Select this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL
Select this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI (Factory default)
Select this when your TV is compatible with both the NTSC and PAL
formats.
NTSC signals are output from the video output jacks when discs
recorded in NTSC format are played, and PAL signals are output from
the video output jacks when discs recorded in PAL format are played.
NOTE:
• If "TV TYPE" is set to a format other than a registered TV format, the
image may no longer be smooth and the top and bottom of the image
may be cut off.
e When "VIDEO OUT" is selected: (NOTES)
PROGRESSIVE (Factory default)
Select this when using the DVD-3910 connected to a progressive type
TV.
INTERLACED
Select this when using the DVD-3910 connected to an interlace type TV.
NOTE:
• For the component output only, it is possible to switch between
interlace image output and progressive image output. It is not possible
to specify progressive image output for the Video output connector or
S-Video output connector.
3
r When "PROGRESSIVE MODE" is selected:
AUTO 1 (Factory default)
Select this when the image recorded to the DVD is film material.
AUTO 2
Select this when the image recorded to the DVD is 30-frame film
material.
VIDEO 1 TO 3
Select this when the image recorded to the DVD is video material.
VIDEO 1
Select this for regular video material.
VIDEO 2
Select this for video material having little movement.
VIDEO 3
Select this for video material having a lot of movement.
t When "SQUEEZE MODE" is selected:
OFF (Factory default)
Select this to display without changing the screen size.
ON
Select this when playing back a 4:3 image that you wish
to display at 4:3 aspect ratio at the center of a 16:9 TV.
✽ Only effective for set to "WIDE (16:9)" at "TV ASPECT".
(See page 36.)
✽ No effective for interlaced image.
Remote control unit
V I DEO SE TUP
T V ASPEC T
TV TYPE
V I DEO OUT
PROGRE SS I V E MODE
SQUEE Z E MODE
E X I T SE TUP
SE L EC T :
V I DEO SE TUP
T V ASPECT
TV TYPE
V I DEO OUT
PROGRE SS I V E MODE
SQUEE Z E MODE
E X I T SE TUP
SE L EC T :
V I DEO SE TUP
T V ASPECT
TV TYPE
V I DEO OUT
PROGRE SS I V E MODE
SQUEE Z E MODE
E X I T SE TUP
SE L EC T :
V I DEO SE TUP
T V ASPECT
TV TYPE
V I DEO OUT
PROGRE SS I V E MODE
SQUEE Z E MODE
E X I T SE TUP
TV
SE L EC T :
✽ To exit the setup mode
TV
Use the ª cursor button to select "EXIT SETUP",
then press the ENTER button. It is also possible to
quit by pressing the SETUP button on the remote
control unit.
ENGLISH
Remote control unit
NTSC
PAL
MUL T I
DEC I S I ON : ENTE R BUT TON
PROGRE SS I VE
I NT E RL AC ED
DEC I S I ON : ENT ER BUT TON
AUTO1
AUTO2
V I DE O1
V I DE O2
V I DE O3
DEC I S I ON : ENT ER BUT TON
OFF
ON
DEC I S I ON : ENTE R BUT TON
37