Playing A Disc; Playing A Dvd Video Or An Audio Cd; Using The Dvd Menus - Denon DVD-900 Operating Instructions Manual

Denon operating instructions dvd video player dvd-900
Hide thumbs Also See for DVD-900:
Table of Contents

Advertisement

Available languages

Available languages

PLAYING A DVD VIDEO OR AN
AUDIO CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1
Press the ON/STANDBY (POWER) button.
¡
The power will turn on.
2
Press the OPEN/CLOSE button.
¡
The disc loading tray will open.
3
Place a disc into the tray.
¡
Make sure the disc is sitting properly in the correct
recess, with the label side up.
4
Press the PLAY button.
¡
The tray will close automatically, and playback will
then start from the first chapter or the first track of
the disc. With some discs, if the tray has been closed
by pressing the OPEN/CLOSE button, You need to
press the PLAY button to start the disc.
¡
When you playback the DVD or Video CD which a
title menu is recorded, it may appear on the screen.
In this case, refer to "USING THE DVD MENUS"
or "USING THE TITLE MENU".
5
Press the STOP button to stop play.

PLAYING A DISC

Notes
¡
While the setup menu is shown you can not open or
close the tray.
DVD
CD
¡
A "prohibited icon" may appear at
the top-right on the TV screen dur-
ing operation, warning that a pro-
hibited operation has been encoun-
tered by the DVD player or the
disc.
¡
If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
¡
With DVDs that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
¡
During the playback of two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.
¡
The operation may vary when you playback DVDs
with disc menu. Refer to the manual accompanying
the disc for details.
Some DVDs contain their own menus, such as a guid-
ance menu which describes the contents of the disc or
a selection menu for sound, language and other cus-
tomized settings.
1
¡
The DVD menu will appear.
2
¡
Press the cursor buttons (
setting, and then press the ENTER button.
3
– 15 –

USING THE DVD MENUS

Press the MENU button.
Select the desired title.
L
/
K
Playback will start from the selected title.
DVD
/B/s) to change the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dht-684dvd

Table of Contents