Denon DVD-3910 Operating Instructions Manual page 50

ENGLISH
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the
intermediate frequencies.
SHARPNESS (HIGH) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the high
frequencies. (Only effective for progressive
images.)
HUE (–6 to +6) (Factory default: 0)
3
• This adjusts the balance between green and red.
(Not effective for progressive scan output nor
component output.)
CCS (0 to +3) (Factory default: 0)
• This performs removal of the color signal
component for images in which the color signal
component is mixed with the brightness signal.
(Only effective with progressive images.)
When Image Quality Adjustment 2 Is Selected and
Adjusted:
WHITE LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the white level.
CHROMA LEVEL (–6 to +6) (Factory default: 0)
• This adjusts the density of the color.
4
CHROMA DELAY (–2 to +2) (Factory default: 0)
• This adjusts the shift of the brightness signal and the
color signal of the image. (Only effective for
progressive images.)
DNR (Digital Noise Reduction) (0 to +6) (Factory default: 0)
• This reduces video noise.
When ENHANCER (ADJUSTMENT 3) is selected and
adjusted:
ENHANCER V (0 to +11) (Factory default: 0)
5
• This emphasizes the vertical contour of the image.
ENHANCER H (0 to +11) (Factory default: 0)
• This emphasizes the horizontal contour of the image.
50
MEMORY 1
0
Remote control unit
MEMORY 1
0
Remote control unit
1 2 3
0 0
0
1 2 3
0