Dvd Audio - Denon DVD-3910 Operating Instructions Manual

ENGLISH
(7) Denon Link connections
High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold Denon Link compatible
AV amplifier.
DVD-3910
Front speaker (left)
Surround speaker (left)
2 DENON LINK Second Edition:
• With the DENON LINK, Second Edition (2nd), the audio signals are transferred from the DVD player to the AV amplifier in digital
form, with the same quality as the signals recorded on the disc.
Digital transfer of the high quality multi-channel signals of DVD audio is possible for all discs. (A Second Edition compatible DVD
player and AV amplifier are required for this.)
2 Compatibility with previous models:
• Digital audio signals output from a DENON LINK S.E. (2nd) compatible DVD player can only be played on a DENON LINK S.E. (2nd)
compatible AV amplifier (Playback with DENON LINK connections is not possible when using a DENON LINK S.E. compatible DVD
player in combination with an AV amplifier that is not S.E. compatible.).
• "S.E." is indicated on the rear panel's DENON LINK connector on DENON LINK S.E. compatible products.
2 DENON LINK S.E. settings:
• At "DIGITAL INTERFACE SETUP" under "SETUP", set "DENON LINK" to "2nd". (See pages 32 ~ 35.)
(If you connect the DENON LINK, set to "2nd".)
16
Center speaker
SURROUND MODE MULTI FUNCTION
DOLBY DTS WIDE 5CH / 7CH DSP MODE
FUNCTION CONTROL
STEREO SURROUND SURROUND SCREEN STEREO SIMULATION STATUS SELECT
CINEMA / 6.1 / 7.1 VIDEO TONE REC /
ANALOG EXT. IN MUSIC SURROUND ON / OFF DEFEAT M-ZONE 1 M-ZONE 2
INPUT REC SELECT / M-ZONE
AV amplifier with Denon Link input
terminals
To power outlet
Front speaker (right)
Subwoofer
Surround speaker (right)
for
Taiwan R.O.C.
( or )
for
Southeast Asia