Denon DVD-3910 Operating Instructions Manual page 12

ENGLISH
(3) Connecting to a AV amplifier with a built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player's digital audio
output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie
theater or concert hall.
DVD-3910
Front speaker (left)
Surround speaker (left)
NOTES:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
• When playing copyright-protected linear PCM or packed PCM DVDs, in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources, either set "LPCM (44.1 kHz/48 kHz)" under "AUDIO SETUP" at
"SETUP" to "ON" (See pages 38, 41.) or make analog connections. (See page 14.)
• When making digital connections to an AV amplifier that is not compatible with 96 kHz/88.2 kHz signals, set "LPCM (44.1 kHz/48 kHz)"
under "AUDIO SETUP" at "SETUP" to "ON". (See pages 38, 41.)
• With Super audio CDs, digital audio signals cannot be output from the digital out terminals. Use analog or IEEE1394 connections.
(See pages 14, 17, 18.)
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Line up in proper direction
Line up the cable in the proper directly, then insert it securely as
far as it goes.
12
Optical fiber cable
75Ω/ohms pin-plug
(commercially
cable (commercially
(or)
available)
available)
Digital audio input Digital audio input
connector (COAXIAL) connector (OPTICAL)
SURROUND MODE
DOLBY DTS WIDE 5CH / 7CH DSP
STEREO SURROUND SURROUND SCREEN STEREO SIMULATION
CINEMA / 6.1 / 7.1 VIDEO TONE
ANALOG EXT. IN MUSIC SURROUND ON / OFF DEFEAT
INPUT
AV amplifier with a built-in decoder
(AV control center)
Center speaker
Front speaker (right)
Subwoofer
Surround speaker (right)
MULTI FUNCTION
MODE FUNCTION CONTROL
STATUS SELECT
REC /
M-ZONE 1 M-ZONE 2
REC SELECT / M-ZONE
for
Taiwan R.O.C.
( or )
To power outlet
for
Southeast Asia