Denon DVD-3910 Operating Instructions Manual page 11

(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Color component output connectors (P
The red (P /C ), blue (P
R R
reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (P
Y, B-Y and Y/C , C
R B
• Connect in this way if your TV is compatible with Progressive Scan.
DVD-3910
L R
AUDIO IN
NOTES:
• Use the three commercially available video cords to connect the DVD-3910's color component output connectors to the TV or monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV is NTSC formatted set
to NTSC. (See pages 36, 37.)
• Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV.
• To use with 5.1ch audio output, set "2CH (SRS OFF)" or "2CH (SRS ON)" in "AUDIO CHANNEL" in "AUDIO SETUP" in "SETUP"
at the initial settings. (See page 38.)
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to comply with your TV's aspect. (See page 36.)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
/C , P /C
R R B
/C ) and brightness (Y) signals are output independently, achieving more faithful
B B
and Y, etc.). For details, refer to the TV's operating instructions.
TV
and Y)
B
P /C P /C Y
R R B B
COMPONENT VIDEO IN
ENGLISH
, P and Y/R-
R B
for
Southeast Asia
( or )
To power outlet
for
Taiwan R.O.C.
11