Chain Lubrication; Replacing The Console Batteries - Schwinn IC2 Indoor Cycling Bike Assembly Manual

Chain Lubrication

Remove the chain guard door and apply a few drops of bike chain oil to the chain.
!
Do not apply oil when the chain is moving.
Note: Use caution to avoid staining clothes or carpet.

Replacing the Console Batteries

The Console display will show "Batt" during power up if the battery level is low. When replacing the
batteries, make sure the batteries point in the +/– direction shown in the battery bay.
Note: The console uses AA size batteries (LR6).
Do not mix old and new batteries.
!
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
Be sure to remove the batteries to prevent corrosion damage if you are not going to use the
machine for an extended period of time.
24
X2
+
-