12
THE SCHWINN EVOLUTION BIKE MAINTENANCE
Daily maintenance
FIG.11
Dry the Schwinn Evolution Bike after each use to
remove sweat and moisture. Wipe your Schwinn
Evolution Bike regularly with a mild, non-abrasive
cleaner and water solution. Rinse to remove
detergent residue and then dry.
IMPORTANT!
Schwinn Evolution Bike, never use a petroleum-
based solvent when cleaning.
Chain adjustment
FIG.12
The chain on your Schwinn Evolution Bike has been
factory set and lubricated. It should not require any
immediate attention. Over time however you may
need to make minor tension adjustments.
1. With an adjustable wrench, loosen the two bolts
on either side of the flywheel. (Fig. 11)
2. Tighten the two smaller nuts which go through
the frame tube evenly by turning clockwise until
there is approximately 3/16" of slack in the chain
(Fig. 12).
3. Tighten the two larger nuts on the sides of the
flywheel (Fig. 11).
To avoid damaging the finish on your