Maintenance; Chain Lubrication; Replacing The Console Batteries - Schwinn IC2i Assembly Manual / Owner's Manual

Table of Contents

Advertisement

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to
do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that
regular maintenance is done. Worn, damaged or loose components must be repaired or replaced immedi-
ately. Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact your local distributor for
replacement labels.
Daily:
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts.
Do not use if found in this condition. Repair or replace all parts at the first sign of wear or
damage. After each workout, use a damp cloth to wipe your machine and Console free of
sweat.
Note: Avoid excessive moisture on the Console.
Weekly:
Clean the machine to remove any dust, dirt, or grime from the surfaces. Check for smooth
seat and handlebar operation. If needed, sparingly apply a thin coating of silicone lube to
ease operation.
Note: Do not use petroleum based products.
Monthly
Check pedals and crank arms and tighten as necessary. Make sure all bolts and screws are
or after 20 hours:
tight. Tighten as necessary. Lubricate chain with bike chain oil.
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console
free of moisture.

Chain Lubrication

Remove the chain guard door and apply a few drops of bike chain oil to the chain.
Do not apply oil when the chain is moving.
Note: Use caution to avoid staining clothes or carpet.

Replacing the Console Batteries

The Console display will show "Batt" during power up if the battery level is
low. When replacing the batteries, make sure the batteries point in the +/–
direction shown in the battery bay.
Note: The console uses AA size batteries (LR6).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-
Cd, Ni-MH, etc) batteries.
Be sure to remove the batteries to prevent corrosion damage if you are not
going to use the machine for an extended period of time.
Silicone lubricant is not intended for human consumption. Keep out of reach of
children. Store in a safe place.

MAINTENANCE

X2
+
-
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic2

Table of Contents