Leveling The Bike; Moving The Bike - Schwinn IC2 Indoor Cycling Bike Assembly Manual

9. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual. Refer to the
Safety Warning Labels and Serial Number section of this manual.
Do not use or put the machine into service until the machine has been fully assembled and
!
inspected for correct performance in accordance with the Owner's Manual.

Leveling the Bike

Levelers are found on each side of the stabilizers.
Turn the knob to adjust the stabilizer foot. Make sure
the bike is level and stable before you exercise.

Moving the Bike

To move the bike, carefully pull the Handlebars toward you
while pushing the front of the bike downward. Push the bike
to the desired location.
NOTICE: Be careful when you move the machine. Abrupt
motions can affect the computer operation.
14