Others; About The Denon Link Function; Al24 Processing Plus; Copyright Protection Technology - Denon DVD-2930 Operating Instructions Manual

Others

About the DENON LINK function

DENON LINK is a balanced transfer type digital link using high speed
transfer elements. Connecting the DENON LINK terminal to a DENON
AV amplifier equipped with a special terminal using a special cable
enables high speed, high quality transfer of digital audio signals with
little loss of signal quality, resulting in high quality sound production.
DENON LINK is an exclusive DENON digital interface, allowing digital
transfer of the 2 channels of 192 kHz/24 bit digital signals of DVD-
Audio discs and of PCM multi-channel signals. In addition, DENON
LINK 3rd Edition allows for full specification digital transfer of the
audio contents of Super Audio CDs.
The "DENON LINK" indicator lights on the display during DENON
LINK processing.

AL24 Processing Plus

AL24 Processing Plus is an analog waveform reproduction technology
compatible even with the high bit rates and high sampling rates of
next generation media.
AL24 Processing Plus conducts digital data interpolation based on the
digital data that is input to achieve analog waveforms near those the
sounds must have had in the natural environment. The sound is
reproduced with 24-bit quality, increasing the music reproducing
performance when the volume is low and achieving reverberations
that seem to suck you into the concert hall. AL24 Processing Plus is
provided for not only the front left and right channels but also the
surround left and right, center and subwoofer channels.
The "AL24 PLUS" indicator lights on the display during AL24
Processing Plus processing.

Copyright protection technology

This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision , and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.

Resetting

If the display is abnormal or the main unit or remote control unit do
not function, reset the DVD-2930 using the procedure described
below.
1 <
In the stop mode, press
simultaneously.
2
Check that the "INITIALIZE" indicator turns off
from the TV screen, then release the buttons.
• This completes the resetting procedure.
• If the resetting procedure is not completed, start over from step
46
ENGLISH

Registered trademarks

The DVD-2930 is manufactured using the technologies listed below
(in random order).
• "NSV" is a trademark of Analog Devices, Inc.
• "HDMI, the HDMI long and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC."
® , HDCD ® , High Definition Compatible Digital ® and
• "
Microsoft ® are either registered trademarks or trademarks of
Microsoft Corporation, Inc. in the United States and/or other
countries. HDCD system manufactured under license from
Microsoft Corporation, Inc. This product is covered by one or more
of the following: In the USA: 5,479,168, 5,638,074, 5,640,161,
5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in
Australia: 669114. Other patents pending.
• Manufactured under license from Dolby Laboratories. "Dolby" and
> < > the double-D symbol are trademarks of Dolby Laboratories.
1 and 9
• "DTS" and "DTS Digital Surround" are registered trademarks of
Digital Theater Systems, Inc.
• "KODAK" is a trademark of Eastman Kodak Company.
• "FUJICOLOR CD" is a trademark of Fuji Photo Film Co, Ltd.
• "Windows Media™", "Windows ® "are a trademarks of Microsoft
Corporation, Inc.
• DivX, DivX Certified, and associated logos are trademarks of DivX,
Inc. and are used under licence.
1
.
ENGLISH
Others