Troubleshooting - Denon DVD-2930 Operating Instructions Manual

Dvd audio-video / super audio cd player
Hide thumbs Also See for DVD-2930:
Table of Contents

Advertisement

ENGLISH
Others

Troubleshooting

If a problem should arise, first check the following:
1. Are all the connections correct ?
2. Is the set being operated as described in the Operating Instructions ?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
Symptom
Power does not turn on.
• Plug the power supply cord into the power outlet.
Playback does not start even
• Condensation? (Let sit 1 or 2 hours)
when the
button is
• You are attempting to play a disc other than one with one of the marks on
1
pressed, or starts but stops
page 3.
immediately.
• Wipe the dirt off the disc or replace the disc.
• Check the connections.
• Check whether "VIDEO OUT" in the pure direct settings is set to "OFF"
Picture does not appear.
or "ALL OFF".
• Set the TV's input to "video".
• Check the connections.
• Set the proper inputs (TV, stereo, etc.).
• Check the "DIGITAL OUTPUT" and "COMPRESSION" settings.
• Digital signals are not output for Super Audio CDs. Use analog or DENON
LINK 3rd connections.
No sound is heard or the
• No audio signals are output from the HDMI terminal if "VIDEO OUT" or
sound is hard to hear.
"DIGITAL OUTPUT" in the pure direct settings is set to "OFF" or "ALL
OFF".
• When HDMI connections are made with a device not compatible with
HDMI Ver. 1.1, the audio signals of DVD-Audio discs that are copyright
protected with CPPM are not output.
Menu playback does not work
• Menu playback only works for video CDs with playback control.
for video CDs.
Picture is disturbed when
• The picture may be somewhat disturbed. This is normal.
fast-forwarded or fast-
reversed.
Buttons do not operate.
• Some discs may prohibit certain operations.
• Subtitles cannot be displayed for DVDs that do not contain subtitles.
Subtitles are not displayed.
• The subtitles are set to "off". Set the subtitles.
• The language cannot be switched unless the disc contains more than one
The audio (or subtitle)
language.
language cannot be switched.
• With some discs, the audio (or subtitle) language is switched not as
described in this manual but by using the DVD menu screen, etc.
Check
Page
12
3, 4
3
4
9 ~ 12
28
9 ~ 12
23
10, 11
28
12
36
32
16
34
ENGLISH
Symptom
• The angle cannot be switched unless the DVD contains more than one
The angle cannot be
angle.
switched.
In some cases, multiple angles are only provided for specific scenes.
Playback does not start when
• Check the "Viewing restriction level" setting.
a title is selected.
You have forgotten the
• Use the following procedure to reset all the initial setting values to the
password set for restricting
values set upon purchase.
viewing. Reset all the initial
In the stop mode, press the
setting values to the values
(Check that the "INITIALIZE" indicator turns off from the TV screen.)
set upon purchase.
The audio or subtitle language
• The selected language is not set if the DVD does not contain sound or
is not the language set in the
subtitles in that language.
initial settings.
• Set the "TV ASPECT" and "SQUEEZE MODE" items properly in function
The picture is not displayed in
of your TV.
4:3 (16:9) aspect ratio.
Menu screen messages are
• Check the "DISC MENUS" setting at "LANGUAGE SETUP" in the initial
not displayed in the desired
settings.
language.
• Check the HDMI connections. (Check the lighting conditions of HDMI-
related indicators.)
Picture does not appear with
• Check whether the compatible input formats of the connected monitor
HDMI connections.
device match the DVD-2930's input format (HDMI FORMAT).
• Check whether "VIDEO OUT" in the pure direct settings is set to "OFF"
or "ALL OFF".
• Insert the batteries in the proper direction, checking the < and > marks.
• Replace the batteries with new ones.
The set cannot be operated
• Point at the remote control sensor when operating.
with the remote control unit.
• Operate within a distance of 7 meters from the remote control sensor.
• Remove the obstacle.
47
Others
Check
Page
34
25
46
1
and
9
buttons simultaneously.
16
20, 21
16
11, 12
11, 12
28
5
5
5
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents