Connection To A Tv; Digital Connection To An Av Amplifier With Built-In Decoder - Denon DVD-2930 Operating Instructions Manual

ENGLISH
Connections

Connection to a TV

¢ For a TV equipped with a video input or S-Video input terminal
¢ For a TV equipped with component video input terminals
• If the TV to which the player is to be connected is compatible with progressive scan video, connect to
the component video input terminals.
• The DVD-2930's progressive output (525P/625P) is compatible with Macrovision copy guard. With TVs
that are not compatible with the DVD-2930, the picture may be affected. In this case, set
"COMPONENT VIDEO OUT" at "VIDEO SETUP" to "INTERLACED".
• For TVs not compatible with the progressive mode, set "COMPONENT VIDEO OUT" at "VIDEO
SETUP" to "INTERLACED".
¢ For a TV equipped with an AV-1 input terminal
Monitor
G
S VIDEO
IN
or
J
VIDEO
IN
AUDIO IN
• To improve picture quality, you can change the video signal output from the AV-1 terminal from "VIDEO"
L
L L to either "S-VIDEO" or "RGB" to suit the type of television you are using (
L
R R R
NOTE:
• Connect the DVD-2930's video output either directly to the TV or indirectly via an AV amplifier. Do not
connect it via a VCR (video cassette recorder).
Some discs include copy prohibit signals. If such discs are played via a VCR, the copy guard system
may disturb the picture.
Monitor
H
COMPONENT VIDEO IN
Y

Digital connection to an AV amplifier with built-in decoder

P
B
P
R
When playing DVDs recorded in Dolby Digital or DTS, the Dolby Digital or DTS bitstream is output from
the DVD-2930's digital audio output terminal.
A
AUDIO IN
By connecting the DVD-2930 to an AV amplifier equipped with a built-in Dolby Digital or DTS decoder you
L
L L L
can achieve sound with a power and sense of presence like that of a movie theater or concert hall.
R
R R
NOTE:
• Playing a DVD recorded in DTS when connected to an AV amplifier (decoder) that is not DTS
compatible could result in noise that is unpleasant on the ears and could damage the speakers.
9
ENGLISH
K
D
C
• When using an optical fiber cable (commercially
available), insert its plug fully in the proper
direction.
Match the shapes
Connections
Monitor
AV-1 IN
page 22).
AV amplifier
OPTICAL
IN
or
COAXIAL
IN