Denon DVD-2930 Operating Instructions Manual page 17

Making the initial settings
Audio settings
Viewing restriction setting
Special settings
Description
Set the audio output.
The properties and components of the
SPEAKER
different channels are set automatically
CONFIGURATION for the combination of speakers being
used.
Set the volume of the different
AUDIO
SPEAKER CHANNEL speakers so that the volume of the test
CHANNEL
SETUP LEVEL tones output from them sounds the
same.
This is a parameter for optimizing the
timing at which the sound is output from
DELAY TIME
the speakers and subwoofer according to
their distance from the listening position.
DIGITAL Use this procedure to set the signal format of the digital audio
OUTPUT output.
DOWN Use this procedure to set the digital audio output when playing
SAMPLING DVDs recorded in linear PCM or packed PCM.
Use this procedure to making the setting for direct audio output of
SOURCE DIRECT the disc's data without making the "SPEAKER SETUP" settings at
"AUDIO CHANNEL".
BASS Sets the subwoofer output for when playing 2-channel or other
ENHANCER sources without LFE signals.
Use this procedure to set the dynamic range of the output signals
COMPRESSION
when playing DVDs recorded in Dolby Digital.
Description
A password can be set to restrict (prohibit) the playing of adult DVDs
RATING LEVEL
so that children or others cannot view them.
Use this procedure to change the password for the "RATING
PASSWORD
LEVEL".
Use this procedure to display the registration code for leasing or
®
REGISTRATION purchasing DivX VOD format video files using the DivX
(Video On Demand) service.
Description
Set the playback mode for playing the DVD-Video contents recorded
PLAYER MODE
on DVD-Audio discs.
Use this procedure to set the output of the closed caption signals to
CAPTIONS
display captions using a caption decoder (commercially available).
Use this procedure to set the picture to be displayed on the TV
WALL PAPER
screen when in the stop mode or when playing CDs.
SCREEN SAVER The screensaver functions protects the TV screen from imprinting.
If the display is turned off with the pure direct or dimmer function,
DISPLAY
a description of operations can be displayed for about 2 seconds.
AUTO POWER This function automatically sets the player's power to the standby
MODE mode if the player is left in the stop mode for about 30 minutes.
Use this procedure to set the time after which the still picture (in
SLIDE SHOW
JPEG format) switches when playing still pictures.
Item you want to set (* indicates the setting upon purchase)
MULTI CHANNEL*
FRONT SP CENTER SP
LARGE* / LARGE* / SMALL
SMALL / NONE
FRONT
TEST TONE
LCH
OFF / AUTO /
MANUAL
FRONT
DISTANCE
LCH
METERS* / 0 ~ 18m (3.6m*)
FEET (0 ~ 60ft (12ft*))
NORMAL*
OFF*
Item you want to set (* indicates the setting upon purchase)
0
1
(LOCK ALL)
®
VOD
Item you want to set (* indicates the setting upon purchase)
AUDIO*
PICTURE*
14
ENGLISH
Making the initial settings
2CH (VSS OFF) 2CH (VSS1 ON) 2CH (VSS2 ON)
SUBWOOFER SURROUND SP CROSSOVER
LARGE* / SMALL
YES* / NO 40 / 60 / 80* / 100 / 120Hz
/ NONE
FRONT SURROUND SURROUND
CENTER SUBWOOFER
RCH RCH LCH
0 ~ –10dB (0dB*)
FRONT SURROUND SURROUND
CENTER SUBWOOFER
RCH LCH RCH
0 ~ 18m (3.0m*) 0 ~ 18m (3.6m*)
(0 ~ 60ft (10ft*)) (0 ~ 60ft (12ft*))
PCM
OFF* ON
50kHz 100kHz
OFF* ON
OFF* ON
2 3 4 5 6 7
CHANGE
SHOW CODE
VIDEO
OFF* ON
BLACK GRAY BLUE
OFF* ON
OFF* ON
OFF* ON
5 ~ 15 sec (5 sec*)
ENGLISH
Page
22
22
SW
+10dB
22
OFF* / ON
DEFAULT
22
ON
23
23
23, 24
24
24
Page
8
25
(NO LIMIT)*
25
26
Page
26
26
26
27
27
27
27