Marking Scenes You Want To See Again Later; Adding Marks; Calling Out Marked Scenes - Denon DVD-2930 Operating Instructions Manual

Convenient operations
¢ Specifying the elapsed time
[NUMBER] 0 ~ 9, +10
Use ( ) to input the time, then press
[ENTER]
.
• Playback starts from the specified point.
For some discs it is not possible to specify the time.
For DVD-Video discs:
Example: To specify 1h32m47s
Press [0] / [1] / [3] / [2] / [4] / [7] / [ENTER].
For Video CDs / Music CDs discs:
Example: To specify 1m26s
Press [0] / [1] / [2] / [6] / [ENTER].
For Super audio CDs:
Example: To specify 1h32m47s (92m47s)
Press [0] / [9] / [2] / [4] / [7] / [ENTER].
¢ Specifying groups, titles, tracks or chapters
[NUMBER] 0 ~ 9, +10
Use ( ) to input the number, then
[ENTER]
press .
• Playback starts from the specified point.
For some discs it is not possible to specify the time.

Marking scenes you want to see again later

Scenes you want to see again later can be marked so you can play
them any time.

Adding marks

1
[MARKER]
Press during playback.
• " " is displayed if there is no mark.
2 [F F G G ]
Use to select the marker, then press
the point you want to mark.
• A number is displayed.
• Up to 8 parts can be marked.
1
2
44
ENGLISH

Calling out marked scenes

[F F G G ]
Use to select the mark number, then press
[ENTER]
.
• Playback starts from the marked scene.
[ENTER]
at
¢ To turn off the marker screen:
Press [MARKER].
¢ Clearing the selected mark number:
Use [F F G G ] to select the mark number, then press [CLEAR].
• " " is displayed.
• Depending on where the mark is placed, the subtitles may not be
displayed.
• The marks are stored in the memory until the power is turned off or
the disc is removed from the player.
ENGLISH
Convenient operations