Denon Link Connections; Connection To A Device With An Hdmi Terminal - Denon DVD-2930 Operating Instructions Manual

ENGLISH
Connections

DENON LINK connections

When connected to a DENON LINK-compatible AV amplifier, the multi-channel signals of DVD-Audio
discs, Super Audio CDs, etc., can be transferred as such in digital format.
• Digital transfer is possible up to 24 bit/2ch for 192/176.4 kHz, 24 bit/6ch for 96 kHz or less.
• When making DENON LINK connections, be sure to check the version of the AV amplifier to be
connected then make the "DENON LINK" setting at "initial settings" appropriately (
DENON LINK terminals of different versions are interconnected, there may be no sound or only noise.
• When "DENON LINK" is set, downmixed audio signals are output from the DVD-2930's analog audio
output terminals (L/R, FL/FR and AV-1). When using the 5.1-channel analog audio terminals, set the
"DENON LINK" setting in the initial settings to "OFF".
• The DVD-2930's speaker settings are invalidated when the DENON LINK terminal is connected. (Make
the speaker settings on the AV amplifier to which the DVD-2930 is connected.)
• When the DENON LINK 2nd Edition connection, Super Audio CD's signals are not output from the
DENON LINK terminal. Please use the analog audio output terminals.

Connection to a device with an HDMI terminal

Connecting the DVD-2930 to device with an HDMI terminal using an HDMI cable (sold separately) enables
digital transfer of both digital video signals and multi-channel audio signals.
¢ For a TV, amplifier, etc.
¢ Audio setting of device to be connected with an HDMI terminal (
Device compatible with 2-
channel audio input or device
not compatible with audio
AV amplifier
input
E
DENON
LINK
Device compatible with DTS or
Dolby Digital decoding
Device compatible with 3 or
more channels of audio inputs
(not DTS or Dolby Digital
compatible)
page 19). If two
Super audio CD
¢ Connection with an HDMI/DVI-D conversion cable (adapter)
Monitor or
AV amplifier
I
HDMI
IN
Status of signal from
the DVD-2930's HDMI
11
ENGLISH
Device to be connected
2CH
MULTI
(NORMAL)
MULTI
(LPCM)
Disc type Audio recording format
Dolby Digital 2-channel PCM
DTS 2-channel PCM
DVD-Video
PCM 2-channel PCM
MPEG Audio 2-channel PCM
DVD-Audio LPCM or PPCM 2-channel PCM
Video CD 2-channel PCM
Music CD 2-channel PCM
MP3 CD 2-channel PCM
WMA CD 2-channel PCM
Multi area
Stereo area
CD layer 2-channel PCM
• HDMI video streams (video signals) are compatible with DVI-D.
The DVD-2930 can be connected to a TV with a DVI-D terminal using an HDMI/DVI-D conversion
cable (adapter), but depending on the combination of devices in some cases no picture will be
output.
• When using an HDMI/DVI-D conversion adapter, the picture may not be output properly due to poor
contact with the connected cable.
HDMI-compatible monitor
Both video and audio
output terminal
signals output
Connections
HDMI audio setting
The multi-channel audio signals are output from the analog
audio output and DENON LINK terminal.
Down-mixed 2-channel audio signals are output from the HDMI
output terminal.
The DTS or Dolby Digital signals can be decoded by the
connected TV or AV amplifier.
(The HDMI audio speaker setting, etc., cannot be made.)
Multi-channel audio signals are output from the HDMI terminal.
The HDMI audio speaker setting, etc., can be made.
HDMI audio
2CH MULTI (NORMAL) MULTI (LPCM)
Dolby Digital Multi PCM
DTS Multi PCM
Multi PCM Multi PCM
Multi PCM Multi PCM
Multi PCM Multi PCM
2-channel PCM 2-channel PCM
2-channel PCM 2-channel PCM
2-channel PCM 2-channel PCM
2-channel PCM 2-channel PCM
No output No output No output
No output No output No output
2-channel PCM 2-channel PCM
DVI-D-compatible monitor DVI-D-compatible monitor
(HDCP compatible) (Not HDCP compatible)
Neither video nor audio
Only video signals output *
signals output
* The video signals are only output in RGB format.
page 17)