Connection To A Tv (For Video) - Denon DVM-1835 Operating Instructions Manual

Dvd video auto changer
Hide thumbs Also See for DVM-1835:
Table of Contents

Advertisement

HOOK UPS

Connection to a TV (for video)

Basic Audio
TV
Audio
Cable
(supplied)
DVD
AUDIO OUT
(analog)
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
NOTES
• If your TV is compatible with progressive scanning (525p/480p), connect the TV to the Component Video Output jacks of
the DVD player. Refer to page 12.
• Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
• S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product's S-Video output
connector using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV's 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not includ-
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked "TO TV") to the 75 ohm coaxial antenna termi-
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV's antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked "ANT IN"), then connect the RF modulator to your TV's antenna terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's antenna terminal
through an RF Modulator.
Method 1
Good picture
R
L
Video
Cable
(supplied)
VIDEO OUT
Method 2
Better picture
VIDEO IN
S-Video Cable
(commercially
available)
S-VIDEO OUT
– 14 –
Best picture
S-VIDEO IN
Component
Video
Cable
(commercially
available)
COMPONENT VIDEO OUT
Method 3
COMPONENT
VIDEO IN
C
/P
Y
C
/P
R
R
B
B
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvm-725

Table of Contents