Phone Number General Control Programming: Program Address (3155); Phone Number Format Programming: Program Addresses; Program Addresses (3156-3157) - Bosch DS7400Xi Reference Manual

10.30 Phone Number General Control Programming: Program Address (3155)

See Glossary (section 6.14) for further details.
Select Options
Enable remote programmer call-back
Dial pulse on all phone numbers
Dial tone on all phone numbers**
Dial tone, switch to pulse if required
Try DS7416i first
*0 - *1 are Hex values. They will display as A - B at the keypads.
Select Options
Dialer delay of 15 sec. on non-24H burglar alarms only**
Dialer delay of 15 sec. on 24H burglar & fire alarms only**
Send alarms via either DS7416i or digital
Send alarms via both DS7416i and digital ***
Use 110 Baud comm. for WDSRP
Use 300 Baud comm. for WDSRP
** = These selections can only be used with systems that have only one partition.
*** = This selection must be chosen for UL Listed Requirements when using the DS7416i module.

10.31 Phone Number Format Programming: Program Addresses (3156-3157)

Select Option DD
0
Phone Number Disabled
1
3/1 (no Extended Reporting)
2
3/1E (Extended Reporting)
3
3/1 with Parity
4
3/1E with Parity
5
4/1
6
4/2
7
BFSK
8
SIA 110 Baud
9
Contact ID
*0
SIA 300 Baud
Personal Dialing *2
*5
Pager
DS7400Xi ( 4+) Reference Guide
0
= If this option is selected, see address 3153-3154.
** = Required on PBX systems
*0 - *5 are Hex values. They will display as A - F at the keypads.
= Only applicable when using the DS7416i option.
= If this option is selected, see address 3153-3154.
Select Options
1900 Hz. Data/1400 Hz. Acknowledge
1800 Hz. Data/2300 Hz. Acknowledge
BFSK, SIA, Contact ID
10 Pulses per Second (PPS)
20 Pulses per Second (PPS)
40 Pulses per Second (PPS)
*0, *2, and *5 are Hex values. They will display as A, C, and F
at the keypads.
Copyright © 2007 Bosch Security Systems, Inc.
Enter the Data Digit as a:
1 2 3 4 5 6 7 8
Enter the Data Digit as a:
0 1 2 3 4 5 6 7 8
NOTE:
Data Digit
1 2
Enter the DD as a:
0 0 1 2 3 4 5
Data Digit
1
9 *0 *1
9 *0 *1 *2 *3 *4 *5
Phone Number 1 Format = Address
3156
Phone Number 2 Format = Address
3157
When using the DS7416i Advanced
Radio Communications Module:
Program address 3156 as:
data digit 1 = 9, data digit 2 = 1.
Program address 3157 as:
data digit 1 = 9, data digit 2 = 1.
P/N: F01U035325-01
2
Page 57