General Authority Programming: Program Address (3421-3424); Arming Warning Programming: Program Addresses (3425-3428) - Bosch DS7400Xi Reference Manual

10.22 General Authority Programming: Program Address (3421-3424)

This allows for a user with a General Authority level to Arm, Disarm and Bypass specified zones.
See Glossary (section 6.1) for further details.
Select Option
General Code can Arm, Disarm, and Bypass
General Code can Arm and Bypass
General Code can Arm and Disarm
General Code can Arm

10.23 Arming Warning Programming: Program Addresses (3425-3428)

Arming Warning programming defines whether the keypad will be audible during the exit delay and auto arm period. If programmed, the
keypad sounder will activate once every 5 seconds during the exit delay. At 10 seconds and 5 seconds remaining, the keypad sounder
will activate 3 times. During auto arming, a pre-arming period will begin 15 minutes before the system arms automatically. The keypad
sounders will pulse five times every minute. During the last five minutes before arming, these sounders will be on steady.
DS7400Xi ( 4+) Reference Guide
Program Address 3421
Data Digit 1
Partition 1
DD
0
Program Address 3422
Data Digit 1
1
2
3
Partition 3
Copyright © 2007 Bosch Security Systems, Inc.
Data Digit 1
Data Digit 2
Partition 5
Partition 2
Data Digit 2
Data Digit 1
Partition 7
Partition 4
P/N: F01U035325-01
Program Address 3423
Data Digit 2
Partition 6
Program Address 3424
Data Digit 2
Partition 8
Page 51