Connections - Alpine PKG-2100P Owner's Manual

Connections

Power Connector
AV Connector 1 (AUX1)
AV Connector 2 (AUX2)
26
-EN
1) BATT Yellow
2) ACC Red
3) GND Black
4) DOOR Green
AUX IN 1 (VIDEO) Yellow
AUX IN 1 (AUDIO L) White (L)
AUX IN 1 (AUDIO R)
Red (R)
POWER +12V Red
REMO OUT White/Brown
(AUX 1)
REMOTE IN White/Brown
S-VIDEO Blue/Brown
AUX OUT (VIDEO) Yellow
AUX OUT (AUDIO L) White (L)
AUX OUT (AUDIO R) Red (R)
AUX IN 2 (VIDEO) Yellow
AUX IN 2 (AUDIO L) White (L)
AUX IN 2 (AUDIO R) Red (R)
REMO OUT (AUX 2) White/Brown
The unit needs the following power connections to assure proper
operation of the monitor.
• Battery Lead
Connect this lead to the positive (+) post of the vehicle's battery.
• ACC
Connect this line to the vehicle's ACC line.
(Switched 12V, ignition)
• GND
Connect this line to the vehicle's GND line.
• Door
Connect this lead to the vehicle's door
• Video Input Connector
This connector is used in combination with the video inputs
of other video products (AV head unit or TV Tuner)
• Audio Input Connectors
These connectors are used in combination with a head
unit or TV Tuner with audio output connectors.
• Power Control
Connect this lead to any ALPINE video source product's ACC
line, which is red. It controls turning the power ON/OFF for the
ALPINE video products correspond to unit power.
• Remote Out 1
Corresponds to AUX 1. To control ALPINE DVD player,
TV tuner or DVD-HU, connect to each REMOTE IN.
• Remote In
To control ALPINE PKG-2000P, DVD player or TV tuner
from DVD-HU or LCD monitor in the front area of the vehicle,
connect this line to the ALPINE DVD-HU or LCD monitor
REMOTE OUT.
• S-Video Input
You can not use Composite Video Input and S-Video
input at the same time. It may cause noise on the
screen. Refer to Video Signal setting (page 19)
• Video Output Connector
This connector is used in combination with the video inputs
of other video products (AV head unit or LCD monitor)
• Audio Output Connectors
These connectors are used in combination with a head unit or
LCD monitor with audio input connectors.
• Video Input Connector
This connector is used in combination with the video inputs
of other video products (AV head unit or TV Tuner)
• Audio Input Connectors
These connectors are used in combination with a head
unit or TV Tuner with audio output connectors.
• Remote Out 2
Corresponds to AUX 2. To control ALPINE DVD player,
TV tuner or DVD-HU, connect to each REMOTE IN.