1. Manuals
  2. Brands
  3. Alpine Manuals
  4. Car Stereo System
  5. MULTIMEDIA MANAGER PXA-H701
  6. Owner's manual

Alpine MULTIMEDIA MANAGER PXA-H701 Owner's Manual

Multimedia manager
Hide thumbs
Table of Contents

Advertisement

Quick Links

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/
PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
7300 Warden Ave., Suite 203, Markham,
Ontario L3R 9Z6, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Kukje Printing Co., Ltd
127-2 Gamjeon-dong
Sasang-gu
Busan Korea
PXA-H701
MULTIMEDIA MANAGER™
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L'USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Phone 03-9769-0000
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München,
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Fletchamstead Highway,
Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
®
Germany
Alpine House
R
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris
Nord II, B.P. 50016, 95945 Roissy
Charles de Gaulle Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava) - APDO 133, Spain
Phone 945-283588
Designed by ALPINE Japan
Printed in Korea (S)
68-00493Z09-A
EN
DE
FR
ES
ES
IT
IT
SE
SE

Advertisement

Table of Contents
loading

Related Manuals for Alpine MULTIMEDIA MANAGER PXA-H701

Summary of Contents for Alpine MULTIMEDIA MANAGER PXA-H701

  • Page 1 Si prega di leggere prima di utilizzare il attrezzatura. Innan du använder utrustningen bör du läsa igenom denna användarhandledning. ® ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München,...

  • Page 2: Table Of Contents

    Before using The control unit for the PXA-H701 is sold separately. The operation method using this control unit (sold separately) is printed in this instruction manual. However, if you use head units such as the IVA-D300 series or the IVA-D900...

  • Page 3: Warning

    Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

  • Page 4: Precautions

    Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on. Installation Location Make sure the PXA-H701 will not be installed in a location subjected to: • Direct sun and heat • High humidity and water •...

  • Page 5: Basic Operation

    Basic Operation CHANNEL ENTER SETUP Rotary encoder PRO LOGIC II indicator Dolby Digital indicator DTS indicator Turning the power on and off This unit does not have a power switch. The head unit to which the unit is connected, controls its power.

  • Page 6: Using With Ai-Net Connections

    Alpine products are equipped for a bus connection system called “Ai-NET” which can only be used for connections between Ai-NET products. The PXA-H701 is an Ai-NET product, but is designed to allow connections to other (non Ai-NET) products as well. Thus RCA-type and optical cable connections are also possible.

  • Page 7: Automatic Adjustments

    1) Fasten the microphone included with control unit at the centre of the driver’s seat’s headrest facing upwards. To microphone input jack 2) Connect the microphone to the PXA-H701. To microphone input jack Microphone Set the vehicle’s engine key to the ACC position.
  • Page 8 With the automatic adjustment function, the operation described below is performed. Adjustments are completed in about 10 seconds. Time correction. “END” is displayed for about 15 seconds and the automatic adjustment is completed. • If the microphone does not pick up the sound or the speakers are not working or are connected or wired improperly, the automatic adjustments are not performed and a error...

  • Page 9: Settings/Adjustments

    Settings/Adjustments TCR/PHASE CHANNEL ENTER Rotary encoder Performing time correction manually (TCR)/Switching the phase Because of the particular conditions inside the vehicle, there are major differences in the distances between the different speakers and the listening position. The proper time correction can be obtained using the automatic time correction function (“AUTO TCR”), but it is also possible to calculate the optimum correction values and...
  • Page 10 Press and hold the CHANNEL button for at least 2 seconds and select “L and R (LR)” or “L or R”. L and R (LR) L or R (factory default) L and R (LR): Sets the same adjustment values for the left and right channels. L or R: Different adjustment values can be set for the left and right channels.

  • Page 11: Bass Focus

    Settings/Adjustments TCR/PHASE CHANNEL ENTER B.C. Rotary encoder Bass Focus The time difference between the front-rear/left- right speakers, can be adjusted a pair at a time. Audible time correction can be made from 0.05 ms to 20.00 ms in 401 steps (0 to 400). Check that the defeat mode is off.
  • Page 12 Example of Steps 4 and 5 Setting 1.After entering corrections for the front (left and right) speakers in STEP 30, the time difference is 1.5 ms for both front-left and front-right speakers. 1.5ms 2. After entering corrections for the left (front and rear) speakers in STEP 30, the time difference becomes 3.0 ms* for the front left speaker, and 1.5 ms for the left rear speaker.

  • Page 13: Graphic Equalizer Adjustments

    Settings/Adjustments G.EQ CHANNEL ENTER P.EQ Rotary encoder Graphic equalizer adjustments The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and centre speakers. An additional 10 bands are available for the subwoofer.

  • Page 14: Parametric Equalizer Adjustments

    Parametric equalizer adjustments The frequency bands of the graphic equalizer are fixed. This makes it very difficult to correct for undesired peaks and dips at specific frequencies. The parametric equalizer’s centre frequency can be tuned these specific frequencies. Then, the bandwidth (Q) and level are fine-tuned, independently, to make the necessary corrections.
  • Page 15 Settings/Adjustments CHANNEL ENTER P.EQ Repeat steps 5 to 8 to adjust other bands. To adjust other channels, press the CHANNEL button to return to step 4. * To compare the factory default settings (DEFEAT ON) with your newly adjusted parametric equalizer settings (DEFEAT OFF), do the following: 1) While in the adjustment mode, press and hold the P.EQ button for at least 2 seconds.

  • Page 16: X-Over

    X-OVER The PXA-H701 is equipped with an active crossover allowing the frequency bands to be split before amplification. Because of this, there is no need for a passive network between the speakers and amplifiers. This makes the amplifiers fully independent, eliminating the problem of interference.

  • Page 17: X-Over Adjustment

    Settings/Adjustments X-OVER CHANNEL ENTER Rotary encoder X-OVER adjustment This section describes the procedure for making the X-OVER adjustment. Before performing this procedure, see “X-OVER” on page 15. The SLOPE to FLAT operation from the head unit may not be performed depending on the head unit combination.
  • Page 18 Hint for adjusting the subwoofer • If the subwoofer is installed on the rear deck, setting a gentle L.P.F. slope (for example 6 dB/ oct.) makes the sound localization more to the rear. This can also affect the acoustic localization of the front. Hints for adjusting the high range •...

  • Page 19: Mx Settings

    (IVA-D300 series, etc.) with MX interlocking function considering that “MX mode setting” (page 27) is set to “Manual”. In these cases, the PXA-H701 is not interlocked with the head unit, therefore it is necessary to set the MX from the PXA-H701 with the operations below.

  • Page 20: Bass Comp. Setting

    Turn the Rotary encoder to select the source (media) you want to set, then press the ENTER button. Turn the Rotary encoder to select the desired mode, then press the ENTER button. For further information about setting mode, see step 3 of 1 (page 18). NOTE This function is equipped to work anywhere in the world, and it is possible to set to “XM”.

  • Page 21: Using Dolby Surround

    ENTER Rotary encoder Using the Pro Logic II mode With the PXA-H701, Pro Logic processing can be conducted on the music signals recorded on two channels to achieve Dolby Pro Logic II surround sound. For two-channel Dolby Digital and DTS signals, there is also a “REAR FILL”...

  • Page 22: Adjustment Procedure For Dolby Surround

    (Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS and PCM modes.) Storing settings in the memory (page 28) (Storing all the settings and adjustments made on the PXA-H701 (not only the above settings/adjusts) in the memory) NOTE In case of combining the Automatic adjustments etc.

  • Page 23: Speaker Setup

    ENTER SETUP Rotary encoder Speaker setup The PXA-H701 can be set according to the playable frequency range of your speakers. Check the playable frequency range of the speakers (not including the subwoofer) before performing this operation to verify whether the speakers can play low frequencies (of about 80 Hz or less).

  • Page 24: Mixing Bass Sound To The Rear Channel

    Turn the Rotary encoder to select “Auto”, then press the ENTER button. Test tone output is repeated for each of the different speaker channels. They will be repeated in the order shown below. If no operation is performed for 2 seconds, the channel switches to the next channel.

  • Page 25: Adjusting The Acoustic Image

    Using Dolby Surround ENTER SETUP Rotary encoder Adjusting the acoustic image In most installations, the centre speaker must be placed directly between the front passenger and driver. Using this function, the centre channel information is distributed to the left and right speakers.

  • Page 26: Achieving Powerful High Volume Sound

    Achieving powerful high volume sound With Dolby Digital, the dynamic range is compressed so that powerful sound can be achieved at regular volume levels. This compression can be cancelled to achieve an energetic sound with even greater power, like the sound in a movie theater.

  • Page 27: Convenient Functions

    (only when using the control unit sold separately) When the navigation system is connected, make the navigation system’s voice guidance messages to interrupt the PXA-H701, then output from the front speaker. Press the SETUP button. The setup mode is set.

  • Page 28: Display Settings

    Ai-NET head unit equipped with the automatic MX mode selection function (for example, IVA-D300 series), the MX settings of the head unit are sent to the PXA-H701. In addition, the MX mode switches automatically according to the music source selected by the head unit.

  • Page 29: Storing Settings In The Memory

    Convenient Functions DEFEAT Storing settings in the memory This function can store up to 6 adjustments/ settings. The following adjustments/settings are stored in a preset memory. For more details, see each page for the below items. Page 4: Speakers Setting / Pages 6 - 11: Time Correction/Phase Switching/Bass Focus Setting / Pages 12 - 14: Equalizer Adjustment / Pages 15 - 17: X OVER Adjustment / Pages 18 - 19: MX...

  • Page 30: Switching The Display Mode

    Switching the display mode Press the DISP button to select the desired display mode. Spectrum analyzer display(1~3) Input channel display Display OFF Example of input channel (When monaural surround signal (s) is not inputted) I N P P– 2 The display changes according to the input signals.

  • Page 31: Installation And Connections

    Installation and Connections Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use. Warning DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

  • Page 32: Precautions

    (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the PXA-H701 to the fuse box, make sure the fuse for the intended circuit of the PXA-H701 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle.

  • Page 33: Accessories

    • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors. Contact them for further information. • Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information. Accessories...

  • Page 34: Installation

    Installation Mounting the control unit (Sold Separately) CAUTION: Do not install the control unit near the air-bag of the front passenger’s seat. • Confirm the installation location will be safe. • Determine the mounting position on the dashboard. The area should be large enough to centre the unit and reasonably flat.
  • Page 35 Installation and Connections Mount the spacer and bracket to the control unit. Next, securely mount the factory brackets removed from the factory radio, to the control unit assembly. Flat head screws (M5 x 8) Bracket Flush Mounting the control unit Make a cut-out approximately 178 (width) by 50 (height) mm (7 inches by 2 inches) in size at your desired mounting location.
  • Page 36 Mounting the base unit G Velcro Fastener Mounting Velcro fastener Attach to the vehicle (such as under the dashboard). G Using the Mounting Screws (Supplied) The Base Unit can be mounted under the seat using the mounting screws. Decide on the installation location. •...

  • Page 37: Basic Connections Diagram

    • Guide control cable White/ Green Used to interrupt the navigation system’s sound. Fuse • Battery power cable Power is supplied constantly to the PXA-H701 regardless Yellow (3A) of whether the engine key is on or off. • Ground cable Black Connect securely to a metal part of the vehicle’s body.

  • Page 38: Examples Of System Expansion

    Examples of system expansion • PXA-H701 + Ai-NET Compatible Head Unit + DVD Changer + Monitor + External Amplifier CENTER SELECTABLE SUBWOOFER CD/DVD H.U. DIGITAL 1 DIGITAL 2 DIGITAL 3 CONTROL UNIT FRONT 1 FRONT 2 REAR SUBWOOFER OUTPUT INPUT GUIDE Ai–NET IN...
  • Page 39 Installation and Connections • PXA-H701 + Ai-NET Compatible Head Unit + CD Changer + External Amplifier CENTER SELECTABLE SUBWOOFER CD/DVD H.U. DIGITAL 1 DIGITAL 2 DIGITAL 3 CONTROL UNIT FRONT 1 FRONT 2 REAR SUBWOOFER OUTPUT INPUT GUIDE Ai–NET IN...
  • Page 40 The PXA-H701 can then be turned on using this switch. The PXA-H701 can be used with any head unit. However, only an Alpine Ai-NET compatible head unit will be able to take full advantage of all the features and functions of this processor.
  • Page 41 Installation and Connections • PXA-H701 + IVA-D300 series Head Unit + CD Changer + Navigation System + External Amplifier White/Green White/Green Guide Control Cable Guide Control Cable RCA connection cable CENTER SELECTABLE SUBWOOFER CD/DVD H.U. DIGITAL 1 DIGITAL 2 CONTROL UNIT...

  • Page 42: Information Se

    Information Terminology Dolby Digital Dolby Digital is a digital audio compression technology developed by Dolby Laboratories that allows large quantities of audio data to be efficiently recorded on discs. It is compatible with audio signals from mono (1 channel) all the way up to 5.1-channel surround sound.

  • Page 43: Others

    This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer. Set does not operate. Nothing appears on the display.

  • Page 44: Specifications

    Specifications Graphic EQ number of bands: Front (left and right) Rear (left and right) Centre Subwoofer Graphic EQ boost cut ±9 dB range: Parametric EQ number of bands: Front/rear/centre 5 bands Subwoofer Parametric EQ frequency: Front, Rear and Centre Band 1: 20/22/25/28/31.5/36/40/45/50/56/ 63/71/80/90/100/110/125/140/160/ 180/200/220/250/280/315/360/400/...
  • Page 45 Car Audio and Navigation Systems GERÄTE-PASS AUDIO SYSTEME Fahrzeugmarke: Amtl. Kennzeichen: Name des Halters: Straße: Wohnort: Bitte füllen Sie diesen Pass vollständig aus und bewahren Sie ihn außerhalb des Fahrzeugs auf: Im Falle eines Diebstahls wird für Sie die Schadensabwicklung mit der Versicherung einfacher, und Sie erleichtern der Polizei die Fahndung nach den Tätern.
  • Page 46 Händlerstempel Tips der Polizei: [ Stellen Sie Ihr Fahrzeug stets gut sichtbar ab. [ Verschließen Sie Türen, Fenster, Schiebedach und Kofferraum immer, auch bei nur kurzer Abwesenheit. [ Lassen Sie keine Wertsachen sichtbar im Auto liegen. [ Wird Ihr Fahrzeug aufgebrochen, wenden Sie sich sofort an die nächste Polizeidienststelle. [ Belassen Sie Ihr Fahrzeug nach einem Aufbruch im Originalzustand.
  • Page 47 Das Ausfüllen dieser Produktinformations-karte voluntary. If you fill in this card and send ist freiwillig. Sollten Sie diese Karte it to Alpine, your data will be tabulated vervollständigen, so werden die Daten für into reference data for future Alpine zukünftige Produktentwicklungen von Alpine als product development.
  • Page 48 Ich stimme dem Kontakt durch Alpine für Informations- und Befragungszwecke zu. J’accepte les termes de cette carte d’information produit Alpine. Estoy conforme con los términos de la tarjeta de información sobre producto de Alpine. Accetto i termini della scheda informazioni prodotti Alpine.

Table of Contents