Using The Scanner Glass - Brother MFC-J6520DW Basic User's Manual

d
Place your document in the ADF, face
up, short edge first until the
Touchscreen shows ADF Ready. and
you feel it touch the feed rollers.
 When using ADF High Speed
Mode in Copy and Scan mode
Make sure your document size is
Letter, A4 or Executive.
Placing your document in the ADF,
face up, long edge first until the
Touchscreen shows ADF Ready.
and you feel it touch the feed rollers.
NOTE
ADF High Speed Mode is available with
Copy and Scan mode. For the information
about ADF High Speed Mode, see the
following:
• (Copy)
ADF High Speed Mode copying
on page 77
• (Scan)
ADF High Speed Mode scanning
on page 92
IMPORTANT
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.

Using the scanner glass

You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported
Length: Up to 17.0 in (431.8 mm)
Width: Up to 11.7 in (297 mm)
Weight: Up to 4.4 lb (2 kg)
How to load documents
NOTE
To use the scanner glass, the ADF must
be empty.
a
Lift the document cover.
Loading documents
45
3
3
3
3