Table of Contents
Advertisement
Chapter 3: Installing the Software
Testing the Installation
When you restart Windows, you can use the
SuperScript printer test function to make sure the
installation was successful. The printer test utility is
available through the Print Test Page button on the
Control Panel tab of the SuperScript Console. The test
utility prints several pages during the test. To begin a
test print, do the following:
1.
Confirm that the printer is connected to the parallel
printer port you selected in the installation.
2.
Confirm that the printer is turned on.
3.
In Windows 95, click Start, point to Programs, NEC
SuperScript Tools, and then click NEC SuperScript
Console.
In Windows 3.1 and 3.11, double click NEC
SuperScript Tools Program Group, then double
click NEC SuperScript Console.
4.
Click the Control Panel tab of the SuperScript
Console.
5.
Click the Print Test Page button.
6.
Choose the print mode, and click OK.
3—8
04 Ch.3 Installing
8
Print Test Page Button
Removing SuperScript Software
You can easily remove any installed SuperScript
software.
1.
In Windows 95, click Start, then click Run. The
Run program dialog box appears. In Windows
3.1 or 3.11, click Run on the File menu.
2.
In all of these cases, type
c:\necssfw\wsremove.exe . This is the
path to the folder containing wsremove.exe.
Press Enter.
By default, the de-install program is loaded in
c:\necssfw. If you have set up the SuperScript
files in a different folder, specify the location of
your setup folder.
96.9.24, 11:22 AM
Advertisement
Table of Contents
