NEC SuperScript 660plus User Manual page 75

Appendix D: Selecting Print Media
Table D-2 Envelope Specifications
ITEM
Base weight 20 lb. (75 g/m
Caliper 5.5 mils (0. 1 4 mm), single thickness
Furnish 100% chemical wood pulp with up to 30%
cotton fiber
Curl Envelope must lie flat, with no more than 0.25
inch curl across the entire surface
Electrical surface resistivity 2.0 to 15 x 10
71.6¡F (22¡C) plus 50% relative humidity)
Finishing Cannot have adhesive exposed to the
inches) so that there are no more than two
paper thicknesses anywhere along the
envelope surface, all glue lines must be
continuous and all folds must be sharply
creased.
Fusing capability Cannot seal, scorch, melt, offset, or release
hazardous emissions when heated to 392¡F
(200¡C) for 0. 1 second
Moisture content 4% to 6% by weight
Smoothness 100 to 250, Sheffield scale
D—8
11 App.D Media* 8
SPECIFICATION
2
) single thickness
10
ohms/square (conditioned at
printer. Must be accurately folded (–0.04
Table D-3 Adhesive Label Specifications
ITEM SPECIFICATION
Caliper No more than 0.0075 (0. 1 9 mm)
Construction The label stock must provide good toner
adhesion. No adhesive can be on the external
label surfaces. General label attachment/die-
cutting cannot allow for peeling during
transport, printing, or electrical fusing. Labels
should cover the entire carrier sheet.
Curl Zero curl toward image side, minimum 30-
degree radius curl toward opposite side. Curl
must be within specifications after heating a
392¡F (200¡C) for 0. 1 second.
Electrical surface resistivity 2.0 to 15 x10
Electrical volume resistivity 1.2 to 15 x10
Finishing Cut sheets must be within –0.0313 inch of
nominal, corners at 90¡ –0.2¡
Fusing capability Cannot scorch, melt, offset, or release
hazardous emissions when heated to 392¡F
(200¡C) for 0. 1 second
Packaging Moisture-proof wrap
Shelf life One year (minimum) stored at 71.6¡F (22¡C)
at 50% relative humidity
Smoothness 100 to 250, Sheffield scale
96.9.24, 1:27 PM
10
ohms/square
11 ohms/centimeter