Testing The Nic - NEC 4650NX - SuperScript Color Laser Printer Network Manual

T NIC
ESTING THE
Follow these steps to verify that the NIC is installed and
operating properly.
1. Connect the network's twisted pair cable with RJ-45
connectors to the new network port on your printer (A).
Reattach the power cord to the printer (B), plug in the
printer.
Connecting the NIC
A
The SuperScript color laser is now a network
printer. The rest of this guide gives information on
configuring your system to use the network printer.
8 SuperScript Color Laser Network Guide
B
C
2. Turn on the printer (C). It may take up to 90 seconds to
warm up, and then it prints a Network Settings page
with NIC status information.
note:
Keep the Network Settings page. You will need
this information when configuring the NIC for your
network.