Table of Contents
Advertisement
Quick Guide
STEP 1. Remove the old thermostat
Turn off power at the breaker.
•
CAUTION
To prevent electrical shock and/or equipment damage, disconnect
electric power to system at main fuse or circuit breaker box until
installation is complete.
Remove cover from old thermostat to expose wires.
•
Document which wires go to which terminals using the table
•
on the back of this manual.
Disconnect wires and remove old thermostat, making sure that
•
thermostat wires do not fall back into wall opening.
STEP 2. Mount the new thermostat
Feed thermostat wires through thermostat hole.
•
Wire new thermostat.
•
Turn on power at breaker.
•
STEP 3. Configure the thermostat
STEP 4. Check thermostat operation
STEP 5. Verify wireless connectivity
The sections that follow provide detailed instructions
for completing these steps.
3
Advertisement
Table of Contents
