Step 6: Verify Wireless Connectivity - Emerson EE542-1Z Installation Manual

STEP 6. Verify Wireless Connectivity
STEP 1
The following screen in the NETWORK
SETTINGS area of the installation menu
will serve as further confirmation of
network connectivity:
STEP 2
On the home screen, a wireless icon will
also confirm that the unit is in fact
connected to a network coordinator.
STEP 3
If a connection is not made, the words
"NO CONNECTION" will appear.
NOTE: Immediately upon joining the network, "Syncing Time" may appear
on the home screen for up to 10 minutes while the product obtains time
from the meter or gateway device.
Network Connection Settings
Status:
Leave
1:54 PM - Mar. 12
75
F
Base Rate
$0.08
kWh
Inbox Heat
1:54 PM - Mar. 12
NO
CONNECTION 75
F
Inbox Heat
Connected
Hold At
77
Hold Until
5:30PM – Mon
End
Hold
Hold At
77
Hold Until
5:30PM – Mon
End
Hold
19