Assembly - Pro-Form 355 Treadmill User Manual

ASSEMBLY

Assembly requires two persons. Set your treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
3/4" Tek Screw (58)–8
Assembly requires the included hex key
rubber mallet
As you assemble your treadmill, use the drawings below to identify small parts. The number in parentheses below
each drawing is the key number of the part, from the PART LIST in the center of this manual. The number follow-
ing the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, first check to see if
it has been pre-assembled. To avoid damaging plastic parts, do not use power tools for assembly.
Handrail Star
Washer (88)–4
Silver Ground
Screw (75)–1
Handrail Bolt (37)–4
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip the
treadmill onto its left side as shown. Partially fold the
Frame (86) so the treadmill is more stable. Do not fully
fold the treadmill until it is completely assembled.
Insert an Extension Leg (63) into the base of the
Uprights (69) with the Base Pad (61) oriented as shown.
If necessary, tap on the Extension Leg with a rubber mal-
let. Next, hold two Extension Leg Nuts (46) in the bottom
of the Extension Leg, and insert two Extension Leg Bolts
(93) into the top of the Extension Leg. Firmly tighten the
Extension Leg Bolts into the Extension Leg Nuts.
Attach two Round Base Pads (57) to the base of the
Uprights (69) with two 1" Tek Screws (39).
, and adjustable wrench
Nut (13)–2
1/2" Screw (48)–4
and your own Phillips screwdriver
.
Extension Leg
Nut (46)–4
3/4" Screw (2)–8
Extension Leg Bolt (93)–4
1
93
86
6
1/2" Screw (119)–1
Wheel Bolt (64)–2
1" Tek Screw (39)–4
57
69
39
63 46
61
,
39