Assembly - Pro-Form 635CW User Manual

ASSEMBLY
........ y requires two people. Sat the treadmill in a cleared area and remove all packing materials, Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrenc_
and your own phillips screwdriver (_C3=====,- .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill pe_fformance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, r_on-abrasive cleaner.
1. With the help of a second person, carefully raise the
Uprights (82) until the treadmill is in the position shown.
2. Remove the Lock Knob (!27) from the Lock Pin (132).
Make sure that the Lock Pin Collar (130) and the Spring
(129) are on the Lock Pin as shown. Insert the Lock Pin
into the Lock Knob Bracket (128).
Tighten the Lock Knob (127) onto the Lock Pin (132).
127
128
3. Refer to drawing 3a. Loosely thread a Handrail Bolt (78)
with a Handrail Washer (36) into each Extension Leg
(103) and Handrail (85) as shown. Note: Notice the
angle of the Bolt; attach the Bolt and Washer at the ob-
served angle. It should be the same as the angle of the
Handrail (see drawing'3b).
103
C-78
85
o l I
6