Table of Contents
Advertisement
Available languages
Available languages
PHANTO
DISPLY
NAME
Switching the phantom powering on/off (SKP 500 only)
The plug-on transmitter can supply condenser microphones
without internal power supply with 48 V phantom powering (P 48).
The phantom powering can be switched on or off via the "PHANTO"
menu. Please note: Dynamic microphones can be operated in
phantom powering mode without harm. However, if no condenser
microphone module is being used, you should switch off the
phantom powering. With the phantom powering switched on, the
operating time of the batteries or the BA 2015 accupack will be
reduced.
Selecting the standard display
Via the "DISPLY" menu, you can select the standard display:
Selectable
standard display
„FREQ"
„NAME"
„CHAN"
Entering a name
Via the "NAME" menu, you can enter a freely selectable name for
the transmitter. You can, for example, enter the name of the
performer for whom the adjustments have been made.
The name can be displayed on the standard display and can consist
of up to six characters such as:
letters (without pronounciation marks),
numbers from 0 to 9,
special characters e.g. () - . _ and spaces.
To enter a name, proceed as follows:
Press the
SET
button to get into the setting mode of the "NAME"
menu. The first segment starts flashing on the display.
Contents of standard
display
51
Advertisement
Chapters
Table of Contents
