Muting T He Transmitters; Adjusting The Sensitivity; Selecting And Changing A Receiver Channel - Sennheiser XS Wireless Series Instruction Manual

Using the XS WIRELESS systems
Mut ing t he t ransmit t ers
To mute t he transmitters:
Press the MUTE button. The
E
To cancel the muting of the transmitters:
Press the MUTE button. The
E
Adjust ing t he sensit ivit y
Use the slide swit ch 6 (SK) or
E
You can vary the volume and the bass reproduct ion by increasing/ decreasing the
distance between radio microphone and mout h.
Select ing and changing a receiver channel
Make sure that all receivers are set to the same frequency bank in order to prevent inter-
ference and int ermodulation to the transmitter.
Select ing a menu it em and act ivat ing it
3
Press the UP butt on
E
menu item.
Press the set but ton 6 to activate the selected menu item.
E
Menu it em Select t his menu it em t o ...
TUNE manually set an unused frequency.
PRESET select a preset channel.
SC AN set an unused channel by automatic searching.
10 | XS WIRELESS
mute LED lights up yellow. The audio signal is muted.
mute LED goes off. The muting is canceled.
615.
375
5 (SKM) to adjust the sensitivity.
4
or DOWN button to select the TUNE,
615.
375
PRESET or SC AN