Inserting And Changing The Battery; Switching The Transmitter On/Off; Muting The Transmitter - Sennheiser Tourguide UHF Instructions For Use Manual

16

Inserting and changing the battery

Unscrew the display section
Slide back the display section
becomes fully accessible.
Insert the 9 V PP3 alkaline battery (IEC 6 LR 61). Please observe
correct polarity when inserting the battery.
Push the battery compartment into the radiomicrophone's body.
Screw the display section tight.
To change the battery, press out the battery from below (press
in the direction of the arrow).

Switching the transmitter on/off

Turn the protective cap
so that the ON/OFF
Press the ON/OFF button
LED lights up.
To switch the transmitter off, press the
"OFF" appears on the display. You can then release the button.
The red LED goes off.
NB: The on/off switch is a touch switch and only light pressure is
required.

Muting the transmitter

Use the MUTE switch to noiselessly mute the transmitter's audio
signal (this switch does not switch off the transmitter).
by turning it counter-clockwise.
until the battery compartment
at the bottom of the radiomicrophone
button becomes accessible.
to switch the transmitter on. The red
ON/OFF button until