Cleaning The Rs 125 System - Sennheiser RS 125 Instructions For Use Manual

Rf headphone system
Table of Contents

Advertisement

Available languages

Available languages

Cleaning the RS 125 system

CAUTION!
Liquids can damage the electronics of the
devices!
Liquids entering the housing of the devices can
cause a short-circuit and damage the electronics.
Before cleaning, switch the devices off and disconnect the
transmitter from the mains.
Only use a slightly damp cloth to clean the devices.
Replacing the earpads
For reasons of hygiene, you should replace the earpads from
time to time. Spare earpads are available from your Sennheiser
dealer (see "Accessories and spare parts" on page 20).
To loosen the quarter turn fastener which
secures the earpads to the earcups, turn
the earpads
arrow until you overcome a slight resis-
tance.
Lift the earpads
Keep all liquids far away from the devices.
Do not use any cleansing agents or solvents.
5
in the direction of the
5
off the earcups.
Cleaning the RS 125 system
5
5
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents