Connecting The Transmitter To The Mains; Inserting And Changing The Headphones' Rechargeable Batteries - Sennheiser RS 125 Instructions For Use Manual

Adjust the volume of the headphone socket on your sound
source to a medium level. This improves the quality of cord-
less sound transmission. If necessary, check the menu
setting of your TV.
With most TVs, the headphone socket is located at the
front or sides.

Connecting the transmitter to the mains

Connect the yellow connector of the mains unit
yellow socket on the transmitter.
Plug the mains connector into a wall socket.
The transmitter automatically switches on and the oper-
ation indicator
If there is no signal from the sound source for more than three
minutes, the transmitter automatically switches off and the
operation indicator
Disconnecting the transmitter from the mains
Pull the mains connector out of the wall socket.
Inserting and changing the headphones' recharge-
able batteries
Before using the RS 125 for the first time, you have to insert
the supplied rechargeable batteries.
Lift the left earpad
"Replacing the earpads" on page 17.
Putting the RS 125 system into operation
7
lights up.
7
goes off.
5
off as described in the chapter
B
to the
9