The diagrams corresponding to the chapter headings can be found on the fold-out page. Preparing the transmitter for use The transmitter is prepared for wall mounting (recess at the rear of the transmitter). The required mounting material (screws and plugs) is not included in the delivery. Connecting the transmitter to an audio output of your audio source Choose a suitable place near your audio source (e.g.
Page 6
Preparing the headphones for use Opening the battery compartments Turn the ear pads in the direction of the arrow until you overcome a slight resistance and lift them off the ear cups. Inserting and replacing the rechargeable batteries CAUTION Only use NiMH rechargeable batteries, never use standard batteries! Insert the supplied rechargeable batteries.
Some electronic devices (e.g. televisions) can cause interference to your wireless headphone sys- tem. If this happens, increase the distance between the transmitter and the interference source. Specifications and additional information Specifications are included on the inside cover page. Visit our website at www.sennheiser.com.
Manufacturer declarations Warran Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. Before putting the device into operation, please observe the...
Page 9
• Consult the dealer or an experienced radio/TV techni- cian for help. Changes or modifications made to this equipment not ex- pressly approved by Sennheiser electronic Corp. may void FCC authorization to operate this equipment. CAN ICES-3 (B)/NMB-3(B) RF Radiation Exposure Information...