Using The Rs 125 System; Switching The Transmitter On And Off - Sennheiser RS 125 Instructions For Use Manual

Using the RS 125 system

Using the RS 125 system
To switch the devices on and to listen to your sound source,
proceed as follows:
Sequence of steps
1. Make sure that the rechargeable batteries are
charged.
2. Switch your sound source (e.g. TV) on.
3. Switch your headphones on.
4. Set the desired volume.
5. If necessary, set a different channel for your
sound source.

Switching the transmitter on and off

Switching the transmitter on
Switch your sound source on.
The transmitter automatically switches on and the opera-
tion indicator
If the transmitter does not switch on:
Increase the volume of your sound source and, if necessary,
read the chapter "The transmitter does not switch on" on
page 18.
Switching the transmitter off
Switch your sound source off.
If there is no signal from the sound source for more than three
minutes, the transmitter automatically switches off and the
12
7
lights up.
Page
10
12
13
15
14