Cleaning And Maintaining The Rs 2000 - Sennheiser RS 2000 Instruction Manual

Cleaning and maintaining the RS 2000

CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
Keep all liquids far away from the product.
Do not use any solvents or cleansing agents.
To clean the wireless headphone system:
Switch your wireless headphone system off and disconnect the
transmitter from the socket before cleaning.
Clean the product only with a soft, dry cloth.
Clean the charging contacts on the stethoset receiver and in the
charging compartment from time to time using e.g. a cotton
swab.
To clean the ear pads:
Carefully remove the ear pads from the stethoset receiver.
Clean the ear pads with warm soapy water and rinse thoroughly.
Dry the ear pads.
Put the ear pads back on the stethoset receiver.
For reasons of hygiene, you should replace your ear pads from
time to time. Spare ear pads in different materials and forms
are available from your Sennheiser partner.
Cleaning and maintaining the RS 2000
RS 2000 | 19