Care And Cleaning - Fisher & Paykel CG365CWACX1 Installation Instructions And User Manual

Care and cleaning

24
US
CA
(EN)
Important!
The cleaners recommended on the following page indicate cleaner types and do not constitute an
endorsement of a particular brand. Use all products according to directions on the package.
Cooktop part
Grates, burner caps
and SimmerMat,
porcelain enamel finish
Burner parts
Control dials
Stainless steel exterior
Ignitors
Cleaning
Hot soapy water and nylon scourer
Soaking in a solution of biological
clothes washing detergent eg Surf®
Mild abrasive cleansers eg Bon
Ami®
Fume Free oven cleaner eg Easy
Off®
Heavy Duty oven cleaner eg Easy
Off®
Hot soapy water
To clear the holes, use a stiff nylon
brush or wire eg straight-ended
paper clip.
Mild abrasive cleansers eg BonAmi®
Hot soapy water and a soft cloth
Mild abrasive cleansers eg Bon
Ami®
Soak soil under a hot soapy cloth,
rinse and dry thoroughly.
Hard water spots can be removed
with household white vinegar.
Non-abrasive stainless steel
cleaner eg 3M Stainless Steel
Cleaner & Polish. Regular use of a
stainless steel polish will reduce
fingerprints and other marks.
Heavy soiling can be removed with
oven cleaner eg Easy Off® Fume
Free or Easy Off® Heavy Duty.
Toothbrush and rubbing alcohol
Important!
Always allow cooktop parts to cool
completely before cleaning them.
Remove spills as soon as the burner
caps are cool to avoid the soil
becoming burnt on.
Reassemble the burner parts
correctly.
Always apply minimal pressure with
abrasive cleaners.
Never use harsh/abrasive cleaning
agents as they will damage the
stainless steel finish.
Chlorine or chlorine compounds
in some cleaners are corrosive to
stainless steel and may damage the
appereance of your cooktop. Check
the label on the cleaner before using.
A dirty or wet ignitor will prevent the
burner from lighting efficiently.