Care And Cleaning - Fisher & Paykel CI604CTPB1 User Manual

WHAT?
Everyday soiling
on glass
(fingerprints, marks,
stains left by food or
non-sugary spillovers
on the glass)
Boilovers, melts, and
hot sugary spills on
the glass
Spillover on the
touch controls and
stainless steel strip

CARE AND CLEANING

HOW?
1 Switch the power to the
cooktop off at the wall.
2 Apply cooktop cleaner
while the glass is still warm
(but not hot.)
3 Rinse and wipe dry with a
clean cloth or paper towel.
4 Switch the power to the
cooktop back on at the
wall.
Remove these immediately
with a fish slice, palette knife
or razor blade scraper suitable
for ceramic glass cooktops, but
beware of hot cooking zone
surfaces:
1 Switch the power to the
cooktop off at the wall.
2 Hold the blade or utensil
at a 30 angle and scrape
o
the soiling or spill to a cool
area of the cooktop.
3 Clean the soiling or spill up
with a dish cloth or paper
towel.
4 Follow steps 2 to 4 for
'Everyday soiling on glass'
above.
1 Switch the power to the
cooktop off at the wall.
2 Soak up the spill.
3 Wipe the touch control
area with a clean damp
sponge or cloth.
4 Wipe the area completely
dry with a paper towel.
5 Switch the power to the
cooktop back on at the
wall.
IMPORTANT!
When the power to the
z
cooktop is switched off,
there will be no 'hot
surface' indication but the
cooking zone may still be
hot. Take extreme care.
Heavy-duty scourers, some
z
nylon scourers and harsh/
abrasive cleaning agents
may scratch the glass.
Always read the label to
check if your cleaner or
scourer is suitable.
Never leave cleaning
z
residue on the cooktop: the
glass may become stained.
Remove stains left by
z
melts and sugary food
or spillovers as soon as
possible. If left to cool on
the glass, they may be
difficult to remove or even
permanently damage the
glass surface.
Cut hazard: when the safety
z
cover is retracted, the blade
in a scraper is razor-sharp.
Use with extreme care and
always store safely and out
of reach of children.
The cooktop may beep and
z
turn itself off, and the touch
controls may not function
while there is liquid on
them. Make sure you wipe
the touch control area dry
before turning the cooktop
back on.
27