Fisher & Paykel CG365CWACX1 Installation Instructions And User Manual page 15

Converting to a different gas type
Gas regulator
For use with a gas pressure regulator as shown below. The regulator supplied can be set for
either LP Gas or Natural Gas.
Pressure
Regulator
shows
Direction of
Gas Flow
Converting the regulator between NG & LP
Unscrew the cap from the regulator.
1
Check the orientation of the plastic conversion plug, and if necessary, unscrew, turn over and
2
screw back in (wide section away from cap for LP and against cap for NG - see diagram below for
appropriate orientation).
Replace regulator cap.
3
Test gas pressure (test point provision on side of regulator). When converting the regulator for
4
different settings, the function of the regulator must be checked at a pressure at least 1" WC
(0.036 psi) above the specified manifold pressure.
LP
Installation instructions
Cooktop
To Cooktop
Regulator
Solid or Flexible
Connector
Shut-Off
Valve
Pipe Stub from
House supply
NG
13
US
CA
(EN)