Fisher & Paykel CG365CWACX1 Installation Instructions And User Manual page 13

A
Clearance and cabinetry dimensions
A
minimum clearance from left edge of product to nearest vertical surface
B
minimum clearance from right edge of product to nearest vertical surface
minimum clearance from rear edge of product to:
C
nearest combustible surface
nearest non-combustible surface*
D
minimum clearance from front edge of counter to front edge of product
minimum clearance from cooking surface to combustible surface centered
E
above the cooking surface
maximum overall depth of overhead cabinetry
F
minimum distance between overhead cabinets installed to either side of
G
product
minimum vertical distance between counter and cabinet extending above
H
the counter
minimum clearance below top of countertop to:
I
nearest combustible surface
F&P oven or nearest non-combustible surface
maximum distance from the center of the product to the nearest
J
grounded power outlet. The power supply cable must not touch any hot
metal surfaces.
* Recommended non-combustible materials are: ¼ " (6 mm) flame retardant millboard covered with not less
than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm)
copper.
G
F
H
I
(inches (mm))
Installation instructions
C
E
D
B
J
1 ½ " (38) 1 ½ " (38)
1 " (25)
1 ¼ " (32) 1 ¼ " (32)
1 ¼ " (32) 1 ¼ " (32)
less than less than
1 ¼ " (32) 1 ¼ " (32)
30 " (762) 30 " (762)
13 " (330) 13 " (330)
36 " (915) 36 " (915)
18 " (457) 18 " (457)
3 5⁄16" (84) 3 5⁄16" (84)
3 5⁄16" (84) 3 5⁄16" (84)
30 " (762) 30 " (762)
11
US
CA
(EN)
1 " (25)