Installing A Full-Height Expansion Card - Gateway Profile 6 Reference Manual

4
5

Installing a full-height expansion card

To install a full-height expansion card:
1
2
3
48
CHAPTER 4: Upgrading Your Computer
Replace the PCI riser card by sliding it back into place.
Replace the back panel by following the instructions in
"Replacing the back panel" on page
Remove the back panel by following the instructions in
"Opening the case" on page
Remove the PCI riser card by pulling on its green handle.
Caution
Do not touch the contacts on the bottom part of the expansion
card. Touching the contacts can cause electrostatic damage to the card.
Press the two tabs on the card retention lever together,
then lift the card retention lever out of the way.
36.
35.