ZyXEL Communications NBG6503 User Manual page 60

Chapter 7 Router Mode
Table 26 Status Screen: Router Mode (continued)
LABEL
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Firewall
- Bandwidth
Management
- UPnP
- Configuration Mode
Interface Status
Interface
Status
Rate
Summary
BW MGMT Monitor
DHCP Table
Packet Statistics
WLAN Station Status
60
DESCRIPTION
This field displays your Router's present date and time.
This displays what percentage of the Router's processing ability is currently used. When this
percentage is close to 100%, the Router is running at full load, and the throughput is not
going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
This shows what percentage of the heap memory the Router is using.
This shows whether the firewall is enabled or not.
This shows whether the bandwidth management is enabled or not.
This shows whether UPnP is enabled or not.
This shows the web configurator mode you are viewing - Expert.
This displays the Router port types. The port types are: WAN, LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping
a call) if you're using PPPoE or PPTP encapsulation. This field displays N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
Click Details... to go to the Monitor > BW MGMT Monitor screen
39). Use this screen to view the amount of network bandwidth that applications running in
the network are using.
Click Details... to go to the Monitor > DHCP Table screen
this screen to view current DHCP client information.
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN 2.4G / 5G Station Status screen
4.8 on page 41). Use this screen to view the wireless stations that are currently associated
to the Router.
(Section 4.4 on page
(Section 4.5 on page 39). Use
(Section 4.6 on page 40).
(Section
NBG6503 User's Guide