Setup Client Computers To Obtain Ip Address Automatically - Edimax BR-6524n Manual

2-2 Setup client computers to obtain IP address automatically

After the network connection is established, the next step you should
do is setup the router with proper network parameters, so it can work
properly in your network environment.
Before you can connect to the router and start configuration
procedures, your computer must be able to get an IP address
automatically (use dynamic IP address). If it's set to use static IP address,
or you're unsure, please follow the following instructions to configure
your computer to use dynamic IP address:
If the operating system of your computer is....
Windows 95/98/Me
Windows 2000
Windows XP
Windows NT
- please go to section 2-2-1
- please go to section 2-2-2
- please go to section 2-2-3
- please go to section 2-2-4