Edimax BR-6524n Manual page 86

Channel Number
MAC address 1 to 4
Set Security
When you finished with the settings in this page, you can click 'Apply'
button to save changes you made in this page, or you can click 'Cancel'
to discard changes. After you click 'Apply' button, you'll see the
following messages:
Please click 'Apply' to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
You can click 'Continue' to continue on other settings without restart the
broadband router, however, the changes you made will not take effect
before you restart the broadband router.
router (maximum transfer rate 54Mbps).
2.4 GHz (B+G+N): 2.4GHz Band, Allows
802.11b, 802.11g, and 802.11N wireless clients.
It's recommends to select this band to maximize
compatibility.
Select the channel number you wish to use; all
access points must use the same channel.
Input the MAC address of other wireless access
points (the access points you wish to connect).
Click 'Set Security' button to set security
functions of this wireless connection to
improve security. Please refer to chapter
3-2-1-7 for detailed instructions.