2-2 Setup client computers to obtain IP address automatically
After the network connection is established, the next step you should do is setup the
router with proper network parameters, so it can work properly in your network
environment.
Before you can connect to the router and start configuration procedures, your computer
must be able to get an IP address automatically (use dynamic IP address). If it s set to use
static IP address, or you re unsure, please follow the following instructions to configure your
computer to use dynamic IP address:
If the operating system of your computer is .
Windows 95/98/Me
Windows 2000
Windows XP
Windows Vista
- please go to section 2-2-1
- please go to section 2-2-2
- please go to section 2-2-3
- please go to section 2-2-4