License-Based Control For No. Of Henb Connections; License-Based Control For No. Of Subscribers Allowed - Cisco ASR 5x00 Home eNodeB Administration Manual

Home enodeb gateway
Hide thumbs Also See for ASR 5x00 Home eNodeB:
Table of Contents

Advertisement

▀ Features and Functionality - Optional Enhanced Feature Software
With the help of the ACL, the HeNB filtering is done by the HeNB-GW. Finally, the paging message is only sent to the
HeNBs with the allowed CSG ID.
Important:

License-based Control for No. of HeNB Connections

Number of HeNBs connecting to the HeNB-GW are controlled/limited based on the license configuration.
Important:
There are two scenarios for HeNBs connecting to the HeNB-GW: Through IPSec and Direcly HeNB-GW.
With IPSec (Integrated HeNB-GW and SeGW)
In case, IPSec is implemented or the Security Gateway is co-located with the HeNB-GW, IPSec Tunnel setup requests
are dropped once the number of tunnels exceed the configured license limit of the number of HeNBs.
Non-IPSec (Stanalone HeNB-GW)
HeNB-GW rejects the extra HeNB connection attempts with SCTP Abort once the license control is configured for
maximum number of HeNBs to connect to the HeNB-GW.

License-based Control for No. of Subscribers Allowed

Number of subscribers/UEs connecting to the HeNB-GW are also controlled/limited based on the license configuration.
Important:
SNMP Traps, refer the Alarm and Alert Trap Configuration section of the HeNB-GW Service Configuration Procedures
chapter of this guide.
There are two scenarios for HeNBs connecting to the HeNB-GW: Through IPSec and Direcly HeNB-GW.
With IPSec (Integrated HeNB-GW and SeGW)
In case, IPSec is implemented or the Security Gateway is co-located with the HeNB-GW, IPSec Tunnel setup requests
are dropped once the number of tunnels exceed the configured license limit of the number of UEs. UEs limit is based on
configured UE license limit and are rejected with Error Indication message and cause code.
Non-IPSec (Stanalone HeNB-GW)
HeNB-GW rejects the extra UE connection attempts with Error Indocation message with proper cause code once the
license control is configured for maximum number of HeNBs to connect to the HeNB-GW.
Important:
guide.
▄ Cisco ASR 5x00 Home eNodeB Gateway Administration Guide
26
This feature makes dependency on MME to initiate Paging messages containing CSG list.
SNMP traps are generated during Over/Under License capacity situation.
SNMP traps are generated during Over/Under License capacity situation. For more information on
For troubleshooting License related issues, refer the Troubleshooting the Service chapter of this
HeNB Gateway in Wireless LTE Network

Advertisement

Table of Contents
loading

Table of Contents