Monitoring Logging Facility - Cisco ASR 5x00 Home eNodeB Administration Manual

Monitoring the HeNB-GW Service

Monitoring Logging Facility

This section contains commands used to monitor the logging facility active for specific tasks, managers, applications
and other software components in the system.
Table 7. Logging Facility Monitoring Commands
To do this:
Monitor logging facility for specific
session based on Call-id on system
Monitor logging facility based on IP
address used in session on system
Monitor logging facility based on MS
Identity used in session on system
Monitor logging facility based on user
name used in session on system
Monitor HeNB App logging facility on
HeNB-GW system
Monitor HeNB-GW logging facility on
HeNB-GW system
Monitor HeNB-GW Demux logging
facility on HeNB-GW system
Monitor HeNB Manager logging facility
on HeNB-GW system
Monitor S1AP logging facility on HeNB-
GW system
Monitor SCTP logging facility on HeNB-
GW system
Monitor threshold logging facility on
HeNB-GW system
Enter this command:
logging trace callid call_id
logging trace ipaddr ip_address
logging trace msid ms_identifier
logging trace username name
logging filter active facility henbapp level { critical | error
| warning | unusual | info | trace | debug }
logging filter active facility henbgw level { critical | error |
warning | unusual | info | trace | debug }
logging filter active facility henbgwdemux level { critical |
error | warning | unusual | info | trace | debug }
logging filter active facility henbgwmgr level { critical |
error | warning | unusual | info | trace | debug }
logging filter active facility s1ap level { critical | error |
warning | unusual | info | trace | debug }
logging filter active facility sctp level { critical | error |
warning | unusual | info | trace | debug }
logging filter active facility threshold level { critical |
error | warning | unusual | info | trace | debug }
Cisco ASR 5x00 Home eNodeB Gateway Administration Guide ▄
Monitoring Logging Facility ▀
53